SimpliServDocs

Correct stock safely

Check counted quantity, reason, warehouse and serial number before a manual correction

→ Open stock in SimpliServ

For small quantity changes without serial numbers, a click on the stock figure is enough (mode Correction). A manual correction is meant for justified discrepancies, not as a substitute for a missing stock movement. Count physically first and rule out open transactions.

Cause before action

  • incoming goods not booked yet?
  • sale or return still open?
  • wrong warehouse?
  • duplicate serial number?
  • stocktake running?
  • unit or variant mixed up?

Correction

Choose item and warehouse

In the stock list, choose Stocktake / correction from the row's three-dot menu; product and warehouse are then pre-filled. Without a row, start the correction via More at the top right.

Count the actual quantity

Check the physical quantity including units and packaging. Enter the counted value as New Total Quantity, not as a difference. If it is below the reserved quantity, the form warns about a shortfall.

Capture serial numbers and reason

For serialized items the form shows the serial numbers the system has in this warehouse. Remove missing ones, add found ones. In the Reason field state clearly why you're correcting, for example breakage, shrinkage, counting error or opening stock.

Save and check the history

Save with Adjust. Then check the new stock, the Stock movements card on the product (type "Adjustment" with your reason) and the affected serial numbers.

Don't correct during a running stocktake without involving the person responsible for it. Otherwise you end up with two competing truths.

Knock-on effects

Stock can change sales availability, reorder alerts, orders and shop sync. For large differences, check affected documents and integrations.

How is this guide?

On this page