SimpliServDocs

Checkout at the register: every field

Every field in the register checkout: order discount, coupon and gift voucher, invoice customer, payment method cash, card or invoice, amount now and change, split payment, partial payment, print receipt, QR or email, card terminal, anti-money-laundering check and what happens after payment

→ Open cash registers in SimpliServ

The Complete sale checkout opens from the cart with Next (or Ctrl+Enter). At the top is the step "① Cart — ② Payment". On the left you see the lines for checking (they can't be changed here) with Subtotal, Discount, Net, Tax and Total; on the right are all payment settings.

Order discount

  • Quick choice None, −5%, −10%, −15%, −20% or your own value with a choice of % / €. Reset sets it to 0.
  • The discount is distributed proportionally across all lines; the tax is recalculated per line.
  • Customer discount: if you select a customer with a discount below (on the customer or their customer group), the register enters it as a percentage discount, as long as you haven't set a discount of your own yet. Your own discount takes precedence.

Voucher or coupon code

Field "Enter coupon code" and Apply. The register distinguishes two kinds:

KindEffect
Discount couponBecomes the order discount (percentage or amount). Its name or code appears as the discount label on the receipt. Removing it also resets the discount.
Gift voucherIs a means of payment, not a discount. The goods remain fully taxed; the voucher pays part or all of it. The redeemed amount is shown, plus "Remaining voucher balance" or "Voucher fully redeemed." With split payment, the Redemption amount can be changed.

A single-purpose voucher sets the matching lines to 0 % VAT, because the tax was already due when the voucher was sold.

Typical messages: "Voucher code not found.", "Voucher has expired.", "Minimum order amount not met for this coupon.", "Coupon redemption limit reached.", "Voucher has no remaining balance." A gift voucher can't be combined with a partial payment. Details: Discount coupons, Vouchers.

Partial payment

The Partial payment switch ("Collect only part now — the rest later") appears when the payment method isn't Invoice, split payment isn't selected and (for an order) nothing has been paid yet.

  • The amount field is then called Deposit amount. It must be greater than 0 and less than the total; below it is Remaining amount open.
  • An invoice customer is required.
  • SimpliServ creates a real invoice with a number, books the deposit on it and prints a receipt for the deposit. The rest stands as an open item on the invoice. The goods leave stock immediately.
  • Afterwards the register shows Partial payment complete with the invoice number and Go to invoice. Complete sale returns to the register.
  • You record the rest as a payment on the invoice. If it was a partial payment on a scanned order, you collect the rest by scanning the order (ORD-) again, see Take payment for orders and tickets.

Payment method

Three fixed payment methods, the same at every register (not configurable per register):

Payment methodKeyWhat happens
CashF2Default. Amount now field with change.
CardF3With a connected card terminal, the amount goes to the device (see below). Without a terminal, the payment is simply booked as a card payment.
InvoiceF4No payment now. Creates an open invoice with a number, customer required ("An invoice will be created — payment can be made later via the invoice page."). Not with partial payment or split payment. With a scanned order the button is then called Accept as invoice.

What exactly is created: What a sale creates.

Split payment

The Split payment card splits the amount between Cash and Card (one row each; no other payment methods are available here). Not available with payment method invoice, partial payment or a voucher sale.

In the dialog:

  • To pay: the amount due (after any gift voucher).
  • Cash and Card: enter amounts; Rest fills the missing amount into that row. You can't enter more than is due.
  • Cash received and Change: what the customer hands over in cash (default: the cash portion) and what goes back.
  • Open amount, or Balanced (green) when the total matches.
  • Apply is only active when the total matches exactly and "Cash received" covers the cash portion.

The active split then appears on the card ("€ x · € y"). If you choose a single payment method again, the split is cancelled. More: Split a POS payment.

Amount now and change

With Cash (without a split):

  • Amount now is prefilled with the amount due and follows changes to the cart until you enter something yourself. F9 jumps into the field.
  • Quick buttons: exact amount and rounded up to the next 10, 50 and 100 (e.g. for 37.40: 37.40 / 40.00 / 50.00 / 100.00).
  • Change is calculated live and turns orange if too little has been entered. Then the pay button is blocked ("Cash received must be greater than or equal to total.").
  • In Switzerland the cash amount is rounded to 5 centimes; the rounding difference appears on the receipt.

Invoice customer

Select customer is optional, except with payment method Invoice and Partial payment. A selected customer

  • appears with name and address on the receipt and on the A4 invoice for the receipt,
  • suggests their discount,
  • prefills the email address for the receipt,
  • is used for coupon restrictions (customer group, per customer) and the anti-money-laundering check.

If you need a new customer, you can create one and come back: the cart is kept in this browser tab. With a scanned order, the order customer is fixed here ("Order customer · applied automatically").

If you want to give the customer an A4 invoice with their name later, select them before paying. A recipient can't be added at the register afterwards. The register doesn't check the small-amount threshold (AT €400, DE €250); make sure yourself to select a customer with a complete address above it.

Receipt

Not with payment method invoice. Three ways, the default is Print:

OptionResult
PrintReceipt on the printer assigned to the "Receipt" scenario (via SimpliPrint, otherwise the browser's print dialog). Only here does the cash drawer open automatically, if the printer is set up that way (optionally only for cash payments).
Digital (QR)After payment, Digital receipt appears with a QR code; the customer scans it and sees the receipt online. Print receipt prints anyway, Done closes. See Digital receipt.
EmailEnter an address (prefilled with the customer's address, otherwise the operator's; several separated by commas). The email "Your receipt …" contains the PDF and a link and appears in the customer's email history.

With QR and email, the cash drawer doesn't open automatically.

Other elements

  • Print course ticket: only with course lines in the cart, see Courses.
  • Order payment / Invoice payment: info box with invoice number, Open, Total and Already paid when an order or invoice was scanned.
  • Tips don't belong in checkout; record them via More actions → Record tip in the cart.
  • There is no note field for the whole sale; you add notes per line.

Buttons at the bottom

ButtonEffect
Cancel / ← Back / EscFree sale: back to the cart, everything stays. Scanned order or invoice: everything is discarded (cart empty, order lock released), you have to scan again.
Previous receiptReprint the last receipt, see Previous receipt.
Record sale · amountComplete a free sale. The amount is what is due now (deposit, otherwise the amount after voucher).
Pay · amountWith a scanned order or invoice.
Accept as invoiceScanned order with payment method invoice.

The button is blocked while saving, when the cart is empty, the split doesn't match or too little cash has been entered.

What happens when you click "Record sale"

  1. Check: lines present, serial numbers confirmed and unique. A sale of €0 (100 % discount or a voucher that covers it fully) is allowed.
  2. Recheck stock: if goods are missing in the meantime, Insufficient stock appears; Cancel leads back to the cart.
  3. Check payment: customer, partial payment amount, cash, split.
  4. Anti-money-laundering check (cash portion only): if the cash payment, together with the same customer's cash payments in the last 365 days, reaches €10,000, the register requires the customer to be identified (depending on the setting: required, warning only, or off). From 10 July 2027, cash payments over €10,000 are rejected under the EU anti-money-laundering regulation.
  5. Card terminal for the card portion (see below). Cancelled at the terminal: nothing is booked.
  6. Booking: message "Creating receipt…". SimpliServ creates the receipt, payment and stock movement and signs the receipt (RKSV, TSE).
  7. Output the receipt as chosen; message "Sale successfully recorded."
  8. Reset: cart, discount, voucher and split are empty, the search has focus, the stock display on the tiles is updated. A parked sale recalled earlier is deleted.

Double clicks are guarded: if the same sale is sent again within 10 minutes (e.g. after a network error), SimpliServ returns the same receipt instead of booking twice. If the booking is still running, you get "This sale is already being booked. Please wait a moment."

If the receipt isn't signed yet, the register reports "Sale recorded. Receipt #…" and prints as soon as the signature is there (up to about 20 seconds). If the signature device fails, the receipt is printed with a failure note.

With payment method Invoice, the register jumps to the new invoice instead ("Invoice … created."). With Partial payment and voucher sale, a separate completion screen appears.

Card terminal

If a card terminal is set up (Card terminal (ZVT)), the card portion runs through the device before booking:

  • The register chooses this workstation's terminal (ZVT via SimpliPrint, SumUp Solo or a SumUp reader in the Android app). Without a terminal, the card payment is only booked.
  • First it checks whether the register is open ("The register is not open — no card payment was started.").
  • The Card payment dialog shows the amount and progress ("Waiting for card…", "Customer is entering the PIN…" etc.). Cancel cancels at the terminal.
  • On error: Retry, Record without terminal (only if the customer has definitely paid another way) or Cancel.
  • SumUp protection against double charging: if the register finds an approved card payment without a sale, Card payment not assigned to a sale asks. With the same amount: Use for this sale instead of charging again; otherwise Don't assign, charge again (then refund the earlier payment in the SumUp app).
  • If the booking fails after the card was approved, clicking again doesn't charge the card a second time.

How is this guide?

On this page