SimpliServDocs

Register and manage devices

Pair tablets via the kiosk page, understand the device list and workstations and fix pairing problems

→ Open device management in SimpliServ · Open kiosk page

Device management is the administrative entry point for paired tablets and displays. On the tablet itself the kiosk page simpliserv.app/device runs: it doesn't need a user account but shows a code that you confirm in the administration. All settings of a tablet are explained in Pair tablets and devices.

Prepare

Browser and network

Use a current browser and a stable connection on the tablet. Private browser windows can lose the pairing when closed. The kiosk page can be installed as an app on the home screen; it then opens straight into the kiosk instead of the sign-in.

Responsibility

Only pair devices you can assign to a place. Use clear names, for example "Reception iPad" or "Workshop signature 1".

Pair a tablet

Open devices

Open Administration → Data & devices → Devices. Access requires Devices → View.

Start the kiosk on the tablet

Click Pair tablet. Scan the QR code with the tablet camera or open the displayed address on the tablet. The tablet shows a six-digit code valid for ten minutes.

Enter the code and name it

Enter the Code from the tablet, give it a name and confirm with Pair device.

Enable modules and test

On the device page under Modules enable for example Signature or Customer display. Then test a non-productive signature or a test sale before the device goes to the workstation.

Signature device in daily use

  1. Provide the tablet with the kiosk page open.
  2. Check the device for a stable connection and sufficient battery.
  3. Request the signature from the respective document dialog; the tablet takes over the screen automatically.
  4. Test touch operation.
  5. If the tablet is lost, Revoke access immediately.

For signatures directly in the browser on your own screen without a tablet see Full-screen signature.

When a device doesn't respond or doesn't appear

  • Check the status in the list: Online, last contact or Never connected.
  • Relink a tablet that was reset with Re-link tablet – name and modules are kept.
  • If the tablet is assigned to a workstation, only that browser reaches it. Check in the Workstations tab which browser uses which tablet.
  • Don't open several pairing dialogs in parallel; an expired code must be regenerated on the tablet.
  • Check the Devices → View permission and organisation access.

Only revoke or delete devices once running signatures are completed. Otherwise an already open signature process can lose its target page.

How is this guide?

On this page