Set up the print service and troubleshoot
Install SimpliPrint, assign printers and test local printing problems in a structured way
→ Download the print service · Open printer administration
SimpliServ separates printer configuration from the local print service SimpliPrint. A printer can be stored correctly in the application while SimpliPrint isn't running at the workstation – then every print falls back to the browser print dialog. So check all layers. The full setup is described in Printers & label printing.
Printing layers
Application
Under Administration → Data & devices → Printers you set printers and Scenario assignments. The page needs Printing → Use, changes need Printing → Manage.
Local print service (SimpliPrint)
SimpliPrint connects the browser to the physical printer. It must be installed and running on every computer that should print directly. You download the installer for Windows, macOS or Linux on the print-service page; it suggests the matching file automatically and shows a SHA-256 checksum and earlier versions.
Operating system and printer
The printer must be installed in the operating system, reachable and not paused. Paper, toner, tray and network are not part of the SimpliServ configuration.
Initial setup
Test the printer in the operating system
Print a test page directly from the workstation. If that fails, fix driver, network or printer first.
Install SimpliPrint
Open the print-service page on the workstation that will actually print and install the suggested file.
Check detection
Open printer administration and click Re-check in the status banner. Direct printing is only active with SimpliPrint detected.
Assign printers
Add the printer under Detected on this computer and assign it in the Scenario assignments only to the matching document types.
Run a SimpliServ test
Start a test print from a non-critical view. Check paper format, page count and that no old job is printed multiple times.
Fault tree
- Browser print dialog appears instead of direct printing: SimpliPrint isn't running or the document type is — Unassigned —.
- SimpliPrint not detected: start or reinstall the service, then Re-check.
- Printer missing from the list: turn the printer on, make it visible in the operating system, Refresh.
- Job waiting: check the local queue and paper/error status.
- Wrong printer: check assignment and order of fallback printers – the first printer present on this computer wins.
- Wrong layout: check document template, paper format and tray.
- Receipt isn't cut or cash drawer doesn't open: check Cut paper automatically and Open cash drawer automatically on the printer.
Test with a single draft or a copy first. Don't print an already finalised document repeatedly without documenting the output.
Operations check
- SimpliPrint is running at the right workstation.
- Printer reachable and not paused.
- Assignment matches the workstation.
- Test print was correct.
- Employees know the fallback: download the PDF or print via the browser print dialog.
Related topics
How is this guide?
Register and manage devices
Pair tablets via the kiosk page, understand the device list and workstations and fix pairing problems
Manage module settings
Overview of all module settings pages – from tickets and documents through contacts, products and people to courses – plus vehicle types, task priorities, course attributes, seasons and the document inbox