SimpliServDocs

Pair tablets and devices

Pair tablets, enable kiosk functions, assign customer displays to registers and revoke device access

→ Open device management · Open kiosk page

Device management connects tablets to SimpliServ. A tablet doesn't need its own user account: when you open the kiosk page it shows a six-digit code that you confirm in the administration. After that you can enable several modules in parallel.

Device management and device settings need Devices → View. Pairing itself may additionally require a device or administration permission. Only share pairing codes with the person currently setting up the tablet.

Pair a tablet

Open the kiosk on the tablet

Open the kiosk page on the tablet or scan the QR code from the Pair a tablet dialog. The tablet shows a temporary six-digit code.

Open the pairing dialog

Open Administration → Data & devices → Devices and click Pair tablet. Enter the Code from the tablet. The code is valid for ten minutes and is renewed by the tablet.

Name the device

Enter a unique Name, such as "Front counter", and click Pair device. SimpliServ then opens the settings page directly.

Configure modules

On the settings page only enable the functions this tablet needs, and save.

If a known tablet was reset, use Re-link tablet. Name, modules and settings are kept; only access is renegotiated.

Online status and access

The Paired tablets list in the Tablets tab shows Online, the last contact, Never connected or Revoked. The status is refreshed regularly, not through a permanent real-time channel. An old last contact therefore doesn't prove that the tablet is reachable right now.

  • Configure opens name, appearance, workstations and modules.
  • Revoke access stops the tablet immediately; it must be paired again with a new code.
  • Delete removes the device from the list.

Revoke immediately on loss or replacement. Deleting alone is not the right immediate measure if an old tablet still has valid access.

General device settings

Under General you set:

  • the tablet's name
  • Workstations that may use this tablet
  • When idle: Show adverts, Show the clock-in screen or Show the logo and clock
  • Appearance: Light, Dark or Follow the tablet
  • Keep the screen on, so customers never see a black screen

Without a workstation assignment the tablet is available to every workstation. With a selection it only responds to the assigned browsers. This matters when several tills or reception desks stand side by side.

Set up modules

Time clock

Enable Attendance if employees clock in and out on the tablet. Require PIN protects against wrong postings. Reset after (seconds) defines how many seconds the tablet waits after a posting before returning to the neutral state.

Signature

Enable Signature if customers should sign forms with a finger or stylus. With Ask for the signer's name you require the name, with Request expires after (minutes) you limit the validity of an open request. A short timeout prevents the next customer from seeing an old request.

For signatures directly in the browser see Full-screen signature. The full-screen signature field is separate from the signature tablet.

Customer display

Enable Customer display and assign the display to a register under Linked register. Line items and the running total then appear automatically for the matching register. If Show line items is off, the customer only sees the running total.

Second screen on a Windows till

If the customer display hangs as a second monitor on the till PC, you don't need a tablet. The setup file opens the display full-screen on the second screen at every sign-in and keeps mouse and keyboard on the till screen. That way clicks and scanner input never accidentally land on the customer side.

Set the main display

In the Windows display settings the till screen must be marked as main display. The customer display always opens on the other screen.

Download and start the setup

On the till PC open Administration → Data & devices → Devices → Pair tablet and click Download setup in the first step (you also find the same button in the settings of a customer display). Start the file with a double click. If Windows warns, choose More info → Run anyway. Google Chrome is preferred, otherwise Microsoft Edge.

Pair once

The second screen shows a six-digit code. Enter it in the same dialog and give it a name. Then on the device page under Modules enable Customer display and choose the register. The pairing survives restarts and short network outages.

If the second screen is unplugged, the display closes and comes back by itself when plugged in again. For maintenance Ctrl+Alt+Shift+K releases the second screen for ten minutes; pressing again locks it immediately. To remove it, start the file with the -Uninstall parameter from a command prompt and revoke the device here.

Signage

Enable Signage, upload images (up to 10 MB each) and order them with Move earlier / Move later. The tablet changes images after Seconds per image. Without images it shows logo and clock. Tap to browse is handy for a presentation but often better off on a freely accessible customer screen.

A tablet can have several modules. Signature, customer display or a running interaction take over the screen ahead of the idle mode and hand it back afterwards. Test the combination at the real counter before customers work with it.

Assign workstations

In the Workstations tab (Browsers in this shop) browsers appear automatically as soon as they open SimpliServ; the current one is marked as This browser. Give them clear names, decide with May use tablets whether they may use tablets, and choose the tablets at their place under Tablets at this workstation.

Without an assignment the browser uses unbound tablets. That's convenient for a single till but ambiguous with several workstations. Forget this browser only removes the assignment; the browser reappears on next use.

How is this guide?

On this page